Share your SPVI Experience

An engineer is investigating an MPLS LDP issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?
A. show mpls forwarding-table
B. show mpls ldp neighbors
C. show mpls ldp labels
D. show mpls ldp bindings

An engineer is troubleshooting an ongoing network outage. Which command should he use that can display the live log files for a process or service running on a network device?
A. traceroute
B. show run
C. ping
D. debug

Which tool identifies the point of failure in a P2MP LSP from the ingress LSR?
A. Jitter TLV
B. SPAN
C. P2MP traceroute
D. P2MP ping

In a typical service provider environment, which two tools are used to help scale PE router connectivity requirements? (Choose two.)
A. route reflectors
B. VPNv4 address family
C. originator ID
D. cluster ID
E. confederations

An ISP provides a major client MPLS VPN for managed services. The MPLS engineering team needs to use the advanced VPN feature of selective VRF import so that only specific prefixes are present in the required VPNs.
Which aspect of this feature must the team consider?
A. A route must pass the import route map first and then the route target import filter.
B. The routers that are imported in the VRF can be BGP and IGP routes, so other match conditions in the route map, besides communities, can be used.
C. The import-map command is applied under the PE interface that connects to the CE router.
D. A route is imported into the VRF only when at least one RT that is attached to the route matches one RT that is configured in the VRF and the route is permitted by the import route map.

While configuring the VRF Selection feature, you get an error message after typing the below statement:
Router(config)#no vrf selection source 172.16.0.0 255.255.0.0 vrf VRF1
Which action caused this message?
A. the entry of an inconsistent IP address and mask for VRF Selection
B. an attempt to configure a VRF instance on an interface that already has VRF Selection configured
C. an attempt to remove a VRF Selection entry that does not exist
D. an attempt to configure a VRF Selection table that does not exist

Which two BGP attributes prevent loops in a route reflector environment? (Choose two.)
A. cluster ID
B. local preference
C. origin
D. originator ID
E. AS_PATH

An engineer needs to improve MPLS network management by implementing a set of tools to support the NOC engineers in troubleshooting network failures.
Which feature should the engineer implement to check the connectivity of the MPLS LSP between the ingress and egress PE routers?
A. MPLS OAM
B. MPLS-TP
C. LDP autodiscovery
D. extended ping

You try to configure MPLS VPN VRF Selection based on a source IP address on an interface that has VRF configured, but you receive an error.
Which action must you take to correct the problem?
A. Change the source IP address.
B. Add the IP address to the VRF table.
C. Remove the VRF from the interface.
D. Configure static routes for the VRF.

The CTO of a company requires the support of a network consultant to deliver an MPLS solution without resigning to a certain degree of redundancy and scalability. Which solution effectively scales to hundreds or thousands of sites?
A. L2VPN with the broadcast traffic processed at the ingress PE.
B. L3VPN with direct LSP connectivity between all PEs.
C. L2VPN by encapsulating multiple frame formats with interworking.
D. L3VPN using a hierarchical topology of N-PEs and U-PEs.

You are troubleshooting ARP connectivity issues for an Ethernet interface on an IOS XR network that runs IS-IS. You verify that the IGP protocol is running, but an
ARP entry has not yet been created.
Which action should you take?
A. debug ping packets
B. debug ARP
C. ping the connected neighbor
D. verify the RIB table routes

Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model? (Choose two.)
A. The model is suited for nonredundant configurations.
B. The configuration on a newly added site PE is updated automatically.
C. Provider routers know the customer network topology.
D. The customer specifies the exact site-to-site traffic profile.
E. Routing information is exchanged between the customer router and one or a few PEs.

While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are different. Which action should the consultant take in order to make the MPLS L2VPN work?
A. tag-rewrite on the ingress and egress PE router
B. interworking IP configuration on the last PE router before label disposition
C. nonrouted interworking setup to properly translate only the Layer 2 information from the AC
D. interworking IP configuration on both the AC terminations on the PEs

Which mechanism reduces the network flooding caused by host ARP learning behavior?
A. ARP suppression
B. storm control
C. root guard
D. BPDU guard

What do EVPN single-active and all-active have in common?
A. They are default gateway redundancy options.
B. They are multihoming mechanisms used for CE devices.
C. They are used to provide single connection from a CE device to a service provider.
D. They are both roles that a designated router can take when MPLS is used with EVPN.

For be honest all the question that i can get from here are old, and arent valid, i failed the last week, the exam has a lot l2vpn (OAM(cfm) , l2vpn e-tree, l2vpn e-lan,EVPN( native, irb) and little IPV6 (6PE, 6VPE)) it has many scenerios where you have to think how to solve the issue or configuring something missing.

I got 88% with these exam dumps (realdumpscollection.com)

exam for sure . com exam dumps 2023 helped me achieve a score of 92%.

Dumpsfactory.com offers practice tests on their website; just select the demo button.

use coupon code 20OFF Dumpsfactory.com

Dumpsfactory.com is the perfect platform to get the CISCO Exam Dumps. It offers the latest and most updated 300-515 PDF Questions and Answers which are verified by experienced experts. With Dumpsfactory.com, you can be sure that you will get the best quality 300-515 PDF Dumps for your preparation.

I used the exam dumps from Dumpsfactory and passed my exam on the first try. I advise you to use this Dumpsfactory.com in order to ace your exam.

i also passed my exam with dumpsfactory.com

recent updates questions answers To pass your test on the first time, try this website. Dumpsfactory.com

new SPVI 300-515 exam Dumpssure.com

I have passed many certifications by using different dumps material but Dumpssuer.com exam dumps material is the best I found during my long experience.

Dumpssure.com is the best place to prepare for an IT certification. a full package of the helping material for SPVI 300-515 is available on this site.

Latest Updated 71 Exam Dumps Questions. you can successfully pass your exam the first time by using Dumpsfactory.com

100% valid dumps questions because I also pass exam with dumpsfactory.com

I have got a full marks in 300-515 dumps i got 71 questions from dumpssure with 25% discount

This is very good dumps with almost 100% correct answers, much better than any other dumps. Recommend. Dumpssure.com

Great service. I have received my 350-401 questions pdf as the attachment. Thanks for your patient DumpsSure.com.

Certificate ID: AdZv2RkB4W0Xkm-LRI8WbfqxIMG

I Clear my 200-301 exam Click this link: https://dumps4trust.com/SPVI515examsmaterials

@jose thanks for suggestion

@zoubesh, thank Passed the exam yesterday, dumpssure.com

Yesterday I took this exam, all questions are new. The exam changed totally. I had 61q. I did not see Anything question from my dump with 88q (Premium)

@Hi,

Just passed the exam today. Questions here are valid.
Got around 5 new questions

follow the linnk
hhvghgv.c1.biz

Morning.
I have two dumps, one with 88 questions and the other with 71 questions.
According to this forum, none of them is valid, is there a reliable dump?
Can somebody share his experience with no advertisements about no valid dumps?
Thanks in advance, mates.

I have the actual exam. but is not resolve.

please your help

please send me the emails for share it and resolve us

{email not allowed}

juanjoseperezc15c0123
gmail.com

I have the exam with 61q, but dont permit me share bu here. I need pass this exam

Hello Juan
I have sent you an email to share and solve the exam.
Waiting for your replay with the exam to solve between us.
Regards.

Panterarossa,

Listo enviado.

Por favor resolvamos el examen juntos lo antes posible.

Can you sare your dumps?

How does MP-BGP partcipate in an EVPN?
A. It initiates the VRF configuration.
B. It automatically assigns import and export route targets.
C. It propagates Layer 2 MAC Information.
D. It makes Layer 2 forwarding.

Juan, it is C.
It propagates Layer 2 MAC Information.

What is a feature of customer carrier implementation in a CSC environment?
A. It uses BGP to exchange routes between the customers.
B. It provides MPLS as a service in the core to the customers.
C. It provides VPN services to its customers via BGP over the backbone carrier.
D. It provides services to its customers using IGP protocols only.

Which role does BGP serve in a CSC implmentation?
A. It is used as an extension to the TDP protocol to share labels between route reflectors in the same autonomous system.
B. It propagates routes and labels between autonomous systems.
C. It is used to share VPNv4 routes between a single autonomous system only.
D. It serves as the main provider for label and route distribution within a single autonomous system and to one other neigboring autonomous.